SereneDrains Ceramic Recessed Soap Dish - White Glossy - 6x6

Dimensions
Front: 6.5"x6.5"
Back Insert: 5.85"x5.85"
Side Projection: 3.5"

• The soap dish is made of Premium ceramic materials.
  
• The soap holder is ready for installation, with no need to waterproof.
  
• For cleaning of the bar soap holder use only all purpose cleaners.
  
• The shower soap holder in wall is perfect for compact bathrooms and a sleek, built-in look.
• Easy Installation - complete the installation of your soap holder shower with a few easy steps.

Installation Instructions

Step 1: Select Location

Choose a convenient and accessible spot on the wall.

Ensure there are no pipes, electrical wires, or studs behind the chosen location.

Mark the position with a pencil, using a level to keep it straight.

Step 2: Cut the Opening

Measure the recessed portion of the accessory (the part that fits into the wall).

Transfer those dimensions to the wall, adding about 1/8 in. clearance.

Carefully cut the opening using a tile saw for tiled walls, or a drywall saw for non-tiled surfaces.

Step 3: Prepare the Surface

Clean any dust or debris from the cut opening.

Test-fit the accessory to make sure it sits flush with the wall. Adjust the opening if needed.

Step 4: Insert the Accessory

Press the accessory firmly into the opening until it sits flush with the wall surface.

Use a level to ensure it is straight and properly aligned.

Step 6: Seal with Silicone

Run a clean bead of silicone sealant around all outside edges of the accessory where it meets the tile or wall.

Smooth the silicone with a damp finger or finishing tool for a neat appearance.

Allow silicone to cure fully before use.

Step 7: Final Check

Confirm the accessory is secure and level.

Clean the surface with a soft cloth.