SereneDrains Ceramic Recessed Toilet Paper Holder - White Glossy - 6x6

Note: This holder is designed to fit small and standard toilet paper rolls. However, since roll sizes may vary by brand, we recommend checking your specific roll before installation.

Dimensions
Front: 6.5"x6.5"
Back Insert: 5.5"x5.5"
Side Projection: 3.75"

• The toilet paper holder is made of Premium ceramic materials.
• The bathroom toilet paper holder is ready for installation, with no need to waterproof.
• For cleaning of the recessed toilet tissue holder use only all purpose cleaners.
• The toilet paper holder in wall is perfect for compact bathrooms and a sleek, built-in look.
• The toilet paper holder wall is available in classic colors to complement various bathroom styles.
• Easy Installation - complete the installation of your Ceramic toilet paper holder with a few easy steps.

Installation Instructions

Step 1: Select Location

--- Choose a convenient and accessible spot on the wall.

--- Ensure there are no pipes, electrical wires, or studs behind the chosen location.

--- Mark the position with a pencil, using a level to keep it straight.

Step 2: Cut the Opening

--- Measure the recessed portion of the accessory (the part that fits into the wall).

--- Transfer those dimensions to the wall, adding about 1/8 in. clearance.

--- Carefully cut the opening using a tile saw for tiled walls, or a drywall saw for non-tiled surfaces.

Step 3: Prepare the Surface

--- Clean any dust or debris from the cut opening.

--- Test-fit the accessory to make sure it sits flush with the wall. Adjust the opening if needed.

Step 4: Insert the Accessory

--- Press the accessory firmly into the opening until it sits flush with the wall surface.

--- Use a level to ensure it is straight and properly aligned.

Step 6: Seal with Silicone

--- Run a clean bead of silicone sealant around all outside edges of the accessory where it meets the tile or wall.

--- Smooth the silicone with a damp finger or finishing tool for a neat appearance.

--- Allow silicone to cure fully before use.

Step 7: Final Check

--- Confirm the accessory is secure and level.

--- Clean the surface with a soft cloth.