ATR Leveling System – 50 Pro Spindles – ATR20S50

50 Re-Usable Pre-Assemble Spindles 18mm

Apex Coverage Area – 50 sq ft compare at 13 sq ft with other leveling system

NEW Spindles Design are now available

The new spindle features a new screw element with a larger head and grip element,4 segment viewing windows for easier viewing access and much more robust which means you will get more uses and will save you long term expenses

Tiling made easy with the ATR Tile Leveling System

You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System

While every other system require 360 units for 100 pieces of tile ATR Tile Leveling System require only 117

Very easy to learn and use at any skill level

Advantages of the ATR Tile Leveling System

• No Tools (GUN) needed! No need for expensive hand tools.
• Simple and quick to lay with only 2 elements: Spacer & Spindle.
• The only system that removed without the use of a force
• Only System that leave clean grout line (no risk of spacers not break all the way)
• Cross Spacers (+) Shape allow for 2/3 of saving
• Creates a lippage free surface
• Keeps tiles in place while drying
• All-in-one grout spacing and tile alignment system
• Stress free installation
• Professional finishes every time
• Very simple and easy to use
• Saves time
• Suitable for floors and walls
• Suitable for indoor and outdoor uses
• Re-usable spindle
• Australian design and Australian made

Example of the different between ATR Tile Leveling System to other leveling systems

100 pieces of tile project ATR Tile Leveling System use total of 117 spacers with approximately cost of $29.99 compare to any other leveling system 376 spacers with cost of $44.00

About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 259 pieces

How to use 3 Easy steps

1. Spread thinset install tile

2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles.

3. Tighten spindle clock wise firmly until all four corners are aligned flush.
* Remove Re-usable spindle once tile adhesive is dry.